Skip to content
statance
MenuClose
← All ports

Port 8443: HTTPS alternate

Medium risk

Port 8443 is the common alternate HTTPS port. Tomcat’s TLS connector, the UniFi Network controller and Plesk all use it, along with many appliance admin panels. It should not be reachable from the public internet.

Port
8443
Protocol
TCP
Service
HTTPS alternate
Expose to internet?
No
Also used by
Tomcat (TLS), UniFi Network controller, Plesk, Kubernetes dashboards, VMware and NAS admin panels

Is port 8443 safe to open?

The traffic is encrypted, but 8443 usually hosts an admin interface rather than a public site. Admin panels on the internet attract credential stuffing and are hit quickly when vendors disclose vulnerabilities.

How to secure HTTPS alternate

  • Restrict admin panels on 8443 to VPN or known IP addresses.
  • Use a valid certificate and keep the appliance or panel software patched.
  • Enable two-factor authentication where the panel supports it.

Check if port 8443 is open

Linux: what is listening on this port

sudo ss -tlpn | grep ':8443 '

Windows (PowerShell): what is listening

Get-NetTCPConnection -LocalPort 8443 -State Listen | Select-Object LocalAddress, OwningProcess, @{n='Process';e={(Get-Process -Id $_.OwningProcess).Name}}

From another machine: is it reachable

nc -zv HOST 8443 # or nmap -p 8443 HOST # Windows Test-NetConnection HOST -Port 8443

Test the HTTPS alternate service itself

curl -skI https://HOST:8443/

Restrict port 8443 in the firewall

Replace 10.0.0.0/8 with the network or address that needs access. Docker publishes container ports through its own iptables rules, which bypass ufw; bind published ports to 127.0.0.1 (-p 127.0.0.1:8443:8443) instead of relying on the host firewall.

ufw: allow only your private network, deny everyone else

sudo ufw allow from 10.0.0.0/8 to any port 8443 proto tcp sudo ufw deny 8443/tcp

firewalld: allow one source network only

sudo firewall-cmd --permanent --remove-port=8443/tcp sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="10.0.0.0/8" port port="8443" protocol="tcp" accept' sudo firewall-cmd --reload

iptables

sudo iptables -A INPUT -p tcp --dport 8443 -s 10.0.0.0/8 -j ACCEPT sudo iptables -A INPUT -p tcp --dport 8443 -j DROP

Windows Firewall (PowerShell, as Administrator)

New-NetFirewallRule -DisplayName "Block 8443 from internet" -Direction Inbound -Protocol TCP -LocalPort 8443 -RemoteAddress Internet -Action Block

Monitor port 8443

Run a TCP port monitor against your public IP on port 8443: here, a failed connection is the healthy result, so you know the firewall is still doing its job. On Linux, the Statance agent also reports every listening port on the server. TCP port monitoring.

Related ports

Port 443HTTPSLow risk
Port 8080HTTP alternateMedium risk
Port 2087WHM (HTTPS)High risk

FAQ

What is port 8443 used for?

Port 8443 is the common alternate HTTPS port. Tomcat’s TLS connector, the UniFi Network controller and Plesk all use it, along with many appliance admin panels. It is also used by Tomcat (TLS), UniFi Network controller, Plesk, Kubernetes dashboards, VMware and NAS admin panels.

Is it safe to open port 8443?

Not to the public internet. The traffic is encrypted, but 8443 usually hosts an admin interface rather than a public site. Admin panels on the internet attract credential stuffing and are hit quickly when vendors disclose vulnerabilities.

Is port 8443 TCP or UDP?

HTTPS alternate uses TCP on port 8443.

How do I check if port 8443 is open?

On the server, run sudo ss -tulpn | grep ':8443 ' (Linux) or Get-NetTCPConnection -LocalPort 8443 (Windows) to see what is listening. From another machine, run nc -zv HOST 8443 or Test-NetConnection HOST -Port 8443.

All ports →

Know the moment a port stops answering.

TCP, HTTP, DNS and SSL checks from six regions, plus server metrics from a one-line agent.