UDP port 69 is TFTP, a minimal file-transfer protocol used for PXE network booting, IP phone provisioning and loading firmware or configuration on network equipment. It should not be reachable from the public internet.
- Port
- 69
- Protocol
- UDP
- Service
- TFTP
- Expose to internet?
- No
- Also used by
- tftpd-hpa, PXE boot servers, network equipment config backups
Is port 69 safe to open?
TFTP has no authentication at all: anyone who can reach it can download any file in the served directory, and sometimes upload. Those directories often hold device configurations containing passwords. It should only be reachable on the provisioning network.
How to secure TFTP
- Run TFTP only on the internal provisioning network and block UDP 69 at the edge.
- Serve a dedicated directory and run the daemon with
--secure(tftpd-hpa) so clients cannot escape it. - Disable uploads unless you need them.
- Stop the service when you are not actively provisioning devices.
Check if port 69 is open
Linux: what is listening on this port
sudo ss -ulpn | grep ':69 'Windows (PowerShell): what is listening
Get-NetUDPEndpoint -LocalPort 69From another machine: is it reachable
sudo nmap -sU -p 69 HOSTRestrict port 69 in the firewall
Replace 10.0.0.0/8 with the network or address that needs access. Docker publishes container ports through its own iptables rules, which bypass ufw; bind published ports to 127.0.0.1 (-p 127.0.0.1:69:69) instead of relying on the host firewall.
ufw: allow only your private network, deny everyone else
sudo ufw allow from 10.0.0.0/8 to any port 69 proto udp
sudo ufw deny 69/udpfirewalld: allow one source network only
sudo firewall-cmd --permanent --remove-port=69/udp
sudo firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="10.0.0.0/8" port port="69" protocol="udp" accept'
sudo firewall-cmd --reloadiptables
sudo iptables -A INPUT -p udp --dport 69 -s 10.0.0.0/8 -j ACCEPT
sudo iptables -A INPUT -p udp --dport 69 -j DROPWindows Firewall (PowerShell, as Administrator)
New-NetFirewallRule -DisplayName "Block 69 from internet" -Direction Inbound -Protocol UDP -LocalPort 69 -RemoteAddress Internet -Action BlockMonitor port 69
Run a TCP port monitor against your public IP on port 69: here, a failed connection is the healthy result, so you know the firewall is still doing its job. On Linux, the Statance agent also reports every listening port on the server. TCP port monitoring.
Related ports
FAQ
What is port 69 used for?
UDP port 69 is TFTP, a minimal file-transfer protocol used for PXE network booting, IP phone provisioning and loading firmware or configuration on network equipment. It is also used by tftpd-hpa, PXE boot servers, network equipment config backups.
Is it safe to open port 69?
Not to the public internet. TFTP has no authentication at all: anyone who can reach it can download any file in the served directory, and sometimes upload. Those directories often hold device configurations containing passwords. It should only be reachable on the provisioning network.
Is port 69 TCP or UDP?
TFTP uses UDP on port 69.
How do I check if port 69 is open?
On the server, run sudo ss -tulpn | grep ':69 ' (Linux) or Get-NetTCPConnection -LocalPort 69 (Windows) to see what is listening. From another machine, run nc -zv HOST 69 or Test-NetConnection HOST -Port 69.
Know the moment a port stops answering.
TCP, HTTP, DNS and SSL checks from six regions, plus server metrics from a one-line agent.