Skip to content
statance
MenuClose
unknown

CVE-2026-99178

x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context

Published 28 Oct 2026 · Source updated 1 Nov 2026 · Retrieved 2026-11-04 19:27 UTC

Monitor this CVE ↗Full CVE monitoring on Pro and Business

What happened?

In the Linux kernel, the following vulnerability has been resolved:

x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context

An async #PF "page not present" event arrives through the #PF vector, and its reason sits in the per-CPU apf_reason.flags until __kvm_handle_async_pf() reads and clears it. If an NMI arrives after the event is injected and before the #PF handler reads the flags, and the NMI handler itself takes a #PF, that fault reads and clears the flags belonging to the #PF it interrupted. It then finds interrupts disabled in the NMI context it interrupted, and panics:

Kernel panic - not syncing: Host injected async #PF in interrupt disabled region Call Trace: <NMI> panic+0x52/0x60 __kvm_handle_async_pf+0xb0/0xb0 exc_page_fault+0x71/0xb0 asm_exc_page_fault+0x27/0x30 RIP: 0010:__get_user_nocheck_8+0x6/0x20 perf_callchain_user+0x147/0x1a0 get_perf_callchain+0x12d/0x1c0 ... perf_event_nmi_handler+0x26/0x50 exc_nmi+0xe8/0x110 RIP: 0010:asm_exc_page_fault+0x0/0x30 </NMI>

The last RIP line shows the NMI landing on the first instruction of the #PF entry. perf with user call chains takes such a fault: the sampling NMI walks the user stack with __get_user(), which faults when a saved frame pointer is not a valid user address or the walk runs off the top of the stack. The same window exists when KVM, running as an L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after a #PF VM-exit.

The NMI entry code saves and restores CR2 for this nesting, but not the async #PF reason. Andy Lutomirski described the race, with perf as the example, when async #PF delivery was reworked in 2020 [1]. Saving and clearing the flags across the NMI, next to CR2, was discussed there but not merged.

Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS, so the host delivers "page not present" only for user mode faults and a kernel-mode fault in NMI context (including kernel-mode #MC and #DB) cannot be an async page fault. In that case, return without touching the flags so that the interrupted handler finds them intact.

Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot whose memory is served on demand through userfaultfd, so that reading it back takes async #PFs, while every thread samples hardware cycles with user call chains and points its frame pointer at an unmapped page. Without this patch the guest panicked as above in 3 of 3 runs. With it, the guest survived 3 of 3 runs of 60 seconds, and the host counted 148,441 to 153,334 kvm_async_pf_not_present events in the first 20 seconds of each. On 6.18.50 the results were the same: the guest panicked without the patch and survived with it.

Description supplied by CVE Program. Formatting is simplified; follow the original advisory for full details.

Affected software and versions

Source-provided software and version information
SoftwareVersion informationFixed version
LinuxLinuxaffected: 631bc4878220932fe67fc46fc7cf7cccdb1ec597 to < fd60b32a99627fda479c9fa1d4a82fa9f7994670; affected: 631bc4878220932fe67fc46fc7cf7cccdb1ec597 to < b77e9622bbade9812e2090c66d25c372f515e921; affected: 631bc4878220932fe67fc46fc7cf7cccdb1ec597 to < f45ee1ff6358a22d7e22a4c53cb3148ea97b10d9; affected: 631bc4878220932fe67fc46fc7cf7cccdb1ec597 to < 81d99abe2bd81379abfb595e403bbbee6fbfc624See vendor advisory
LinuxLinuxaffected: 2.6.38; unaffected: 0 to < 2.6.38; unaffected: 6.12.115 to ≤ 6.12.*; unaffected: 6.18.59 to ≤ 6.18.*; unaffected: 7.2.13 to ≤ 7.2.*; unaffected: 7.3 to ≤ *See vendor advisory

Version information comes from the source record and can include unaffected products and exceptions. Distribution packages may contain backported fixes: an older upstream version alone does not prove a server is affected.

Is it being exploited?

This CVE was not listed in the CISA catalogue at our last retrieval. This does not establish that exploitation is absent.

CISA data retrieved 2026-11-06 16:38 UTC. Check CISA ↗

How to respond

  1. Confirm the product, installed package version, and any configuration requirements in the vendor advisory.
  2. Follow the vendor’s remediation or workaround guidance in the references below. Structured fixed-version data is unavailable here; the publisher’s description may include a fix or workaround.
  3. Restart affected services if required, then verify the running version. Known exploitation may warrant investigation as well as patching.

Sources and remediation references

This public advisory does not determine whether a particular server is affected. Records are refreshed as sources change; verify urgent decisions against the original advisory.

← Browse the public CVE feed