CVE-2026-98228
mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ
What happened?
In the Linux kernel, the following vulnerability has been resolved:
mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ
On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure.
Otherwise, bad things can happen:
[ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY [ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board [ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000 [ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000 [ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878 [ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000 [ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9 [ 34.133726] $24 : 0000000000000006 00000001200406e0 [ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4 [ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428 [ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428 [ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE [ 34.166551] Cause : 40800408 (ExcCode 02) [ 34.170574] BadVA : 0000000000000000 [ 34.174161] PrId : 0001b028 (MIPS I6500) [ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780) [ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0 [ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80 [ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500 [ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001 [ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff [ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000 [ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000 [ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000 [ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500 [ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000 [ 34.269103] ... [ 34.271568] Call Trace: [ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428 [ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318 [ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138 [ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68 [ 34.295187] [ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3 [ 34.306504] [ 34.308099] ---[ end trace 0000000000000000 ]---
My initial reproducer was the xdp-tools test suite. A standalone reproducer would be an lld/scd loop that, when the read is reordered by the CPU, triggers a fault. We can achieve this from userspace by stressing an anonymous pipe, which uses a mutex. Program used:
// SPDX-License-Identifier: GPL-2.0 // pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c // // Two userspace processes on an anonymous pipe: // parent = writer: tight write() loop // child = reader: tight read() loop
#define _GNU_SOURCE #include <assert.h> #include <errno.h> #include <sched.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include ---truncated---
Affected software and versions
| Software | Version information | Fixed version |
|---|---|---|
| LinuxLinux | affected: fbe0fae601b780622fcb7034a479fa161645b9f4 to < 8a9a8dfab8f6fb3b85859fb021e4275fadd59ad1; affected: fbe0fae601b780622fcb7034a479fa161645b9f4 to < 5802a9fda4cede6af31a3e3b171480c0e446703c; affected: fbe0fae601b780622fcb7034a479fa161645b9f4 to < 3f017c2ca8c31a1e135dd87be647096866d6b196; affected: fbe0fae601b780622fcb7034a479fa161645b9f4 to < bbc448c541ed90d52f9ec22f17394304e3bf170e | See vendor advisory |
| LinuxLinux | affected: 6.11; unaffected: 0 to < 6.11; unaffected: 6.12.117 to ≤ 6.12.*; unaffected: 6.18.61 to ≤ 6.18.*; unaffected: 7.2.8 to ≤ 7.2.*; unaffected: 7.3 to ≤ * | See vendor advisory |
Version information comes from the source record and can include unaffected products and exceptions. Distribution packages may contain backported fixes: an older upstream version alone does not prove a server is affected.
Is it being exploited?
This CVE was not listed in the CISA catalogue at our last retrieval. This does not establish that exploitation is absent.
How to respond
- Confirm the product, installed package version, and any configuration requirements in the vendor advisory.
- Follow the vendor’s remediation or workaround guidance in the references below. Structured fixed-version data is unavailable here; the publisher’s description may include a fix or workaround.
- Restart affected services if required, then verify the running version. Known exploitation may warrant investigation as well as patching.
Sources and remediation references
- https://www.cve.org/CVERecord?id=CVE-2026-98228
- https://git.kernel.org/stable/c/8a9a8dfab8f6fb3b85859fb021e4275fadd59ad1
- https://git.kernel.org/stable/c/5802a9fda4cede6af31a3e3b171480c0e446703c
- https://git.kernel.org/stable/c/3f017c2ca8c31a1e135dd87be647096866d6b196
- https://git.kernel.org/stable/c/bbc448c541ed90d52f9ec22f17394304e3bf170e