Skip to content
statance
MenuClose
medium · CVSS 4.7

CVE-2026-93669

NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization

Published 16 Nov 2026 · Source updated 17 Nov 2026 · Retrieved 2026-11-19 02:10 UTC

Statance checks for CVE-2026-93669. Connected servers are checked automatically against the fixed versions their distribution or package ecosystem has published for it, including app dependency lockfiles. Check my servers ↗
Monitor this CVE ↗Full CVE monitoring on Pro and Business

What happened?

The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).

If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.

The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.

The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.

Description supplied by CVE Program. Formatting is simplified; follow the original advisory for full details.

Affected software and versions

Source-provided software and version information
SoftwareVersion informationFixed version
zephyrzephyrprojectaffected: 3.4.0 to < 4.3.2; affected: 4.4.0 to < 4.5.0See vendor advisory

Version information comes from the source record and can include unaffected products and exceptions. Distribution packages may contain backported fixes: an older upstream version alone does not prove a server is affected.

Is it being exploited?

This CVE was not listed in the CISA catalogue at our last retrieval. This does not establish that exploitation is absent.

CISA data retrieved 2026-11-19 21:16 UTC. Check CISA ↗

How to respond

  1. Confirm the product, installed package version, and any configuration requirements in the vendor advisory.
  2. Follow the vendor’s remediation or workaround guidance in the references below. Structured fixed-version data is unavailable here; the publisher’s description may include a fix or workaround.
  3. Restart affected services if required, then verify the running version. Known exploitation may warrant investigation as well as patching.

Sources and remediation references

This public advisory does not determine whether a particular server is affected. Records are refreshed as sources change; verify urgent decisions against the original advisory.

← Browse the public CVE feed